If you’re like the average American, you get poor sleep. It could be for many reasons. But the biggest one is usually temperature.
Either it gets too hot to the point you sweat under the sheets. Or it gets too cold to the point you shiver uncontrollably. Neither of which is helpful in getting the sleep you deserve. And everyone knows how their day goes when they’re sleep deprived…
Luckily, the ChiliPad Cube gives you full control over the temperature in your bed.
From the look of it, you can already tell it’s an advanced piece of equipment. And you might even be a bit intimidated. But in this ChiliPad Cube Review, you’ll soon realize how simple it really is, and how incredible the effects are once you try it.
However, before I show you how wonderful this Chili Technology is, you need to know this…
The ChiliPad Cube isn’t for everyone. And by that, I mean its price.
You may have already guessed it would be expensive. But the price you pay for the ChiliPad Cube is made up for over the years. In fact, its better than buying a full air conditioner and heater for your bedroom (I explain why later).
So if you already get adequate sleep, or can afford to blast your AC/heater all night long, then the ChiliPad Cube isn’t for you.
However, if you..
… then you might want to get a ChiliPad Cube.
And if its price range of $400-$1100 (depending on the size of your bed) is too much for you, don’t worry. There’s a way around this which I’ll show you near the end.
But first, how does the ChiliPad Cube actually work?
The ChiliPad Cube might seem complicated. But here’s all it is…
It’s a regular mattress pad, except with a built-in network of micro silicone tubes which all connect to the cooling/heating unit (cube). And when turned on, circulates water throughout the entire pad to regulate its temperature to your desired setting — 55ºF to 110ºF.
Like the human heart, the ChiliPad Cube pumps blood (water) into the body’s (mattress pad’s) veins (tubes).
Now you might think, “How can I sleep with a bunch of tubes beneath me?”
Simple.
Thanks to the tubes’ minimal construction and flexible silicone material, not only do you not have to worry about feeling it on your back, but they’re also almost “invisible”. However, some people still say they feel the tubes, while others say they don’t feel a thing.
How can this be?
It’s most likely because of the sleeper’s weight, and the firmness of their mattress. So if you happen to be on the heavier side and your mattress is limp, then the tubes might be a problem.
But if not, then you get the chance to experience a night of sleep like you’ve never had before. And it takes just a few minutes to set everything up…
Click Here Now To Save 25% OFF (Use Chilipad25 At Checkout)
When you order the ChiliPad Cube, a…
… will arrive at your doorstep, packaged nicely inside one of their branded boxes. All ready-to-go straight out of the box. No tools necessary! You just need an outlet, some water, and your own two hands.
So rush this box (weighing no more than 30 pounds, depending on the size you buy) to your bedroom. And in just a few minutes, your bed will turn into an island of supreme comfort.
Here’s how…
The video below is by Chili Technology themselves. She shows you how to set up the ChiliPad Cube in just 5 minutes. But if you want a more in-depth breakdown of everything, scroll down and keep reading.
Take out the mattress pad and notice the soft quilted, 150-thread count poly cotton material. Built with 4 elastic bands on its corners, this easily straps to your mattress. And stays in place no matter how much you twist and turn in bed.
Plus, it’s also easily cared for by placing it in a front load washer with cold water, and dried with air only.
On one end of the topper, you’ll also find a large silicone feeder tube (8 feet long).
This tube is already connected to the micro ones inside. And is what transports water to them once connected to the cube. To do this, just attach the pad’s tube to the connector, and the connector to the unit.
So you have the topper on. Now, you just need to set up the cube itself.
In order for the ChiliPad Cube to work, you’ll need 2 feet of open airflow on all sides (and top) to cool/heat the water. This may be problematic for some people, but setting this on a nightstand is probably your best bet (under your bed is not a good option).
Then, just take the power cord and plug it into your unit and outlet.
Now, unscrew the cube’s reservoir cap and pour in some water. Turn the power on. And instantly, the water will feed into the pad. Repeat this step until the water signal doesn’t pop up anymore. This means your pad is ready.
To set the desired temperature of your bed only takes a push of a button.
Press either up (red button) or down (blue button) to adjust how cold or hot you want your bed to be. Once you choose a specific temperature, for example 60ºF, it will blink three times, then display the real-time temperature. As it works toward achieving your desired setting.
So not only is your ChiliPad Cube an air conditioner/heater, it’s also a thermometer.
Now, some people might be concerned about the noise it makes. But this unit only makes a small fan noise. Much quieter than if you’re using a window AC unit.
Now, most people don’t know what the best temperature is to set their bed. That’s why this remote control comes in handy…
Displaying the same settings and buttons as the cube, you can adjust the temperature while lying in your bed. So this way, you can test whether your bed is too hot or too cold, and adjust it without having to constantly get up. Amazing!
It doesn’t matter how big, small, thin, or thick your mattress is. As long as you have one, you can take advantage of the ChiliPad Cube.
Here are the exact sizes of each pad:
Click here to get your size pad with FREE shipping
For Queen, King, and Cal King, you get a Dual Zone ChiliPad Cube. Which means you get TWO (instead of one) cube units when you order. This means on one pad, there can be two different temperatures.
So if you’re sharing the bed with your partner, you can set your side to 65ºF, while she sets her side to 90ºF. Avoiding the inevitable argument that it’s too hot or too cold. Now, the both of you have your own ChiliPad Cube to use.
As you can expect, this will be more expensive. Dual Zone ChiliPad Cubes run up to $999+. But don’t be alarmed…
The ChiliPad Cube saves money and energy. Even more than the air conditioner or central air you blast all night long in your home.
Central air conditioning uses up to 3500 watts. A medium sized air conditioner uses up to 900 watts. But a ChiliPad Cube?
An average of 80 watts per unit!
But that’s not all…
Unlike your regular air conditioning, the ChiliPad Cube is only turned on when and where you need it most — in the bed! Compare that to trying to keep your entire bedroom cool with an AC. And just think about how low your monthly energy bill will be now…
You see, the price of the ChiliPad Cube is really like buying a normal air conditioner. In fact, it might even be better. Especially when the energy-consumption is almost unmatched.
Click here to start saving energy with your ChiliPad Cube
And when you use your ChiliPad Cube for about a year, the price you paid for it will all be paid back — in addition to getting the best sleep of your life!
But if for some reason the price is still holding you back, then keep reading…
Yes! Chili Technology partnered with FuturePay to give you the option to get your ChiliPad Cube now, and pay it off at your own pace.
Here’s what it says directly on their website:
“You can purchase any of our products for as little as $25. At the end of every billing period, you have two options. 1) You can either pay off the remaining balance in full or 2) Make a minimum payment and carry the rest of the balance over for only $5 per month, per $500. FuturePay is our most flexible payment option, and there are no hidden fees.”
So now, not only can you reduce your energy bill when you buy a ChiliPad Cube, but you also don’t risk your wallet upfront!
Picture it…
You get your ChiliPad Cube for $25. It arrives. You set it up. Test it out. Sleep on it for a complete month. You experience a sleep like never before. You feel rejuvenated each morning, and comfortable each night. And when your energy bill arrives… it’s lower than before!
So if you want to take advantage of this flexible payment option, just choose FuturePay at checkout.
Click here to start using ChiliPad Cube for just $25
Sleep is more important than you think. Some might not agree, but think of it this way…
You spend on average, 1/3 of your day sleeping. Which also means, you spend 1/3 of your life in bed! Doesn’t it only make sense then to maximize your sleep to the best of your ability? After all, the way you sleep is what affects the remaining 2/3 of your waking life.
Why not make the most of it?
And surprise yourself, your partner, or even your entire family with the easiest and most cost-efficient technology — the ChiliPad Cube — to let you sleep like a baby, and wake up like a king (or queen)!
The ChiliPad Cube is also science-backed. So if you think it might not work for you, think again… Studies show sleeping in temperatures of 60-68ºF to be most optimal for health, mental clarity, recovery, deep sleep, and much more!
And if you read up to here, I know you’re serious about your sleep.
And you want to experience how the ChiliPad Cube can solve all these problems for you. If that sounds like you, then you don’t want to waste another second…
Click Here Now To Save 25% OFF (Use Chilipad25 At Checkout)
P.S. The ChiliPad Cube comes with a 90-Day Satisfaction Guarantee and 2-Year Warranty! They also have a step-by-step guide on how to care for your unit so it lasts you years.